Similar User
@TripleGWorkshop
@digitaldragon72
@JKCTX1
@RoyalGnomie
@SliceWorx3D
@AkumaMods
@DuesFalchion
@Omaha3DPrints
@Glendon_3D
@hyperdrive3D
@Solar3dp
@DaddyWazzy
@levelbedded_xyz
@LocalmakerM
@NeilamHailey
The Gnome came out amazing! The @Polymaker_3D Starlight Meteor was the perfect choice. Beautiful filament that really prints well with a 0.6mm nozzle. 🤩
Printing my Christmas Gnome at 250% scale on the @Creality3dP K1 with FlowTech 0.6mm and using @Polymaker_3D Panchroma Starlight Meteor PLA. It's surprisingly Christmasy! 🤣 Link in comments.
"Remember... Short controlled bursts." #3dprinting #airsoft #toys #keychain #pewpew
This is my entry for the 2024 @3dprintindustry awards trophy competition hosted by @printablescom The inner piece rotates independently of the main trophy. It aims to represent the 'freedom' of 3d printing at the moment, as it evolves and progresses, as well as the unknowns…
The @Positron3d with @LDOmotors Orbiter 2 is an absolute TPU unit! makerworld.com/en/models/7423…
My @CoPrint3d kit arrivede! No time to take pictures now, but I'll post some later.
I married my best friend 3 years ago today ❤️ Thanks for putting up with all the 3D printers all over the house 🤣
My Interview with @BeardedPrinter is ready for your eyes! Always good to meet someone new! Stay tuned for more... youtu.be/Tkio0dyutGI
Has XL printer to do smol prints. Only because my current scale for the gingerbread display is smaller than anticipated (for now 😉) Any way, who wants to see a multi color swap attempt at a stained glass window design. It looks ugly up close but 🔥 with backlighting
One more follower to his goal.. lets go twitch.tv/steven_poole68
I have an idea. Since this machine has basically been problematic from the start and with little support from @Creality3dP Let's rip the guts out and put in a kraken from @BigTreeTech and convert it to an IDEX.
If you can make it to Formnext, go over and check out the @phaetus3D booth to see all the cool new items recently announced.
𝐕𝐕𝐃 -- 𝐕𝐢𝐛𝐫𝐚𝐧𝐜𝐞... 𝐒𝐭𝐚𝐲 𝐭𝐮𝐧𝐞𝐝! #BIGTREETECH #VVD #3dprinting #innovation #technology #3D
Hold up.. what coolness did you just find?
I absolutely do not need this but I want one so bad 🤣
Tomorrow evening, I'm interviewing @BeardedPrinter on my Twitch channel! There's a special bonus giveaway, too! forms.gle/8GNAVxdX8fR2b2…
This is going to be epic
Got the Ender 5 Plus converted to Klipper! The new @BigTreeTech E3 EZ board solved my issues with the stock board and allows for Z tilt adjust as well now. This will hopefully be my platform for a @CoPrint3d multi color system!
United States Trends
- 1. #PaulTyson 126 B posts
- 2. #SmackDown 37 B posts
- 3. Goyat 17,1 B posts
- 4. Rosie Perez 2.562 posts
- 5. Barrios 23 B posts
- 6. Evander Holyfield 2.353 posts
- 7. #NetflixBoxing N/A
- 8. #netfilx 1.189 posts
- 9. Shinsuke 2.996 posts
- 10. #NetflixFight 1.013 posts
- 11. Bronson Reed 2.767 posts
- 12. Cedric 6.332 posts
- 13. Purdue 6.370 posts
- 14. Lennox Lewis 1.166 posts
- 15. Ramos 43,3 B posts
- 16. Bayley 5.438 posts
- 17. Cam Thomas 2.616 posts
- 18. My Netflix 9.868 posts
- 19. LA Knight 4.601 posts
- 20. Grok 48,1 B posts
Who to follow
-
Triple G Workshop
@TripleGWorkshop -
Luke Ingerman
@digitaldragon72 -
JKC@TX BC-2-3D
@JKCTX1 -
RoyalGnomie
@RoyalGnomie -
SliceWorx
@SliceWorx3D -
Resin Printing God....AkumaMods!
@AkumaMods -
Mark Christiansen #MRRF
@DuesFalchion -
Omaha 3D Prints
@Omaha3DPrints -
Glendon
@Glendon_3D -
hyper drive
@hyperdrive3D -
Jay ryan
@Solar3dp -
DaddyWazzy_TheCreator
@DaddyWazzy -
Will @Levelbedded.xyz
@levelbedded_xyz -
localmaker
@LocalmakerM -
Neil Hailey
@NeilamHailey
Something went wrong.
Something went wrong.